The lock-Wall (II)
Let's see how we can put a lock recessed.
Mark the holes in the handle and cloth: put the lock on a door face and the same height as the recess of the head will mark the place where the crank and cylinder.
Drilling: make a hole with a spade bit of a sufficient size to properly turn the square bar of the crank. Do the same for the space key and the cylinder. To avoid chipping the wood out of the drill bit market will make a hole through the door.
Screwing: place the lock in the hole and the bolt with long screws (usually come with the lock). Will post making sure the crank is fastened securely to avoid damage to the spring lock and its functioning.
The strike: to mark the door frame where the holes will latch bolt turned and fixed, we will cover the two latches with chalk and close the door. When we open it and marked where boring.
